前面的消息见贴 http://bbs.duowan.com/thread-14116487-1-1.html

DA博客下载地址 http://sceners.org/

DA论坛原帖地址 http://www.dark-alex.org/forum/viewtopic.php?f=83&t=14643

以下为原帖内容：

引用:

Yep, that's right. Pretty soon you will be able to load Custom Firmware right from the chickHEN. This means that you will not only have to use the chickHEN.
Note: This does not flash custom firmware, it only loads it just like the chickHEN, so you will have to restart it everytime you shut off your PSP. However, it does FLASH some modules, but it doesn't OVERWRITE any files, so you don't end up with a brick
I translated the Spanish article for you all: http://translate.google.com/translate?j ... ry_state0=
PSP 3000s are currently not supported, but TA-88v3s are, and obviously the others.
And yes.... you can run ISO/CSO game backups
Only a matter of time before this reaches PSP 3000s near you
n00b81

以下为多玩网友xueyuan2009翻译内容

引用:

从HEN上加载M33！？
是的，非常正确，很快你们就可以从chickHEN上加载CF了，意思是你将没必要只用chickHEN（英语真拗口，说白了就是可以用别的了）（还看不懂的我就再说明白点，这小子意思就是你们不用再指靠着HEN过活啦，可以用M33了）
摘记：这个不会刷写CF，它只是加载，就像chickHEN一样，所以你在每次关闭你的PSP后仍然需要重启，然而它确实是刷了某些单元，不过它不会重写任何文件，所以不会变砖的
我为你们翻译了这个西班牙文的文章
PSP3000目前还不支持，但是TA-88v3可以，很明显其他也可以而且……是的……，你可以运行ISO/CSO游戏了
马上就到PSP3000了，很快的，只需要一段时间
n00b81

以下为DA博客文章内容：

引用:

CFWEnabler 1.0 for ChickHEN released.Category: PSP
"CustomFirmware Enabler 1.0" has just been released on Dark-AleX.org forum, from Xenogears and Becus25.
With this little app, you will be able to enable some of the M33 CFW functions within a PSP Slim with 5.03 Original Firmware and ChickHEN R2 or superior.
And yes, it does works with TA-088v3. With this add-on, you'll have almost a M33 CFW, but the recovery and Pops Games. And yes, you can use your backups.
But no, it doesn't works with 3k models, yet.
How to use it?

1. Download it from the above link.
2. Copy CFWEnabler folder to your ms0:/PSP/GAME/ folder.
3. Once enabled ChickHEN within Photo directory, start the app called "CFW Loader for ChickHEN". First time, it will ask you to install the CFW modules on flash0 pressing circle, and then you will have to press "X" to start the modded CFW.

As well as ChickHEN, once you do a hard reboot, this CFW will be deleted so you will have to restart the process to have it again.
The way this works is the following: ChickHEN starts -> Soft reboot loading systemctrl.prx for homebrew -> M33 modules are flashed -> henctrl.prx is initiated -> Soft reboot loading M33 modules.
This way, as nothing is overwritten, the brick chances are minimum. Enjoy, and good work, Xenogears!

上文翻译

引用:

CFWEnabler 1.0 for ChickHEN放出
平台：PSP
"CustomFirmware Enabler 1.0"刚刚被Xenogears和Becus25在DA论坛上放出。
有了这个应用，你可以在拥有5.03的固件和ChickHEN2的PSP上使用一些M33函数功能。
这个可以在TA-088v3主板上工作，有了这个加载项，你几乎拥有了一个M33自制系统。
但是目前他不能在PSP3K上工作
怎样使用
1.点击这里下载
2.复制CFWEnabler文件夹到ms0:/PSP/GAME/ 文件夹下
3.使用tiff漏洞进入ChickHEN，启动名叫"CFW Loader for ChickHEN"的应用。第一次使用时，他会问你要不要在flash0上安装CFW modules，然后按‘X’启动CFW（欧版的‘X’键好像是确认，这里具体操作有待确认）
想ChickHEN一样，关机之后CFW就会删除，重启须再次使用以上步骤
工作的原理是：ChickHEN starts -> Soft reboot loading systemctrl.prx for homebrew -> M33 modules are flashed -> henctrl.prx is initiated -> Soft reboot loading M33 modules.
所以，没有文件是被改写的，变砖的几率很小（DA使用的minimum，个人理解就是变砖几率极小，但还是有可能变砖，大家谨慎使用）。Enjoy, and good work, Xenogears!

注：附件已更新，为本人从DA论坛下载。

[ 本帖最后由 双黃蛋 于 2009-5-26 09:15 编辑 ]

没想到我坐第一个位置

嘿嘿

真强大哈～～～～～～～
[手机3G坛发帖]

很快了，没事我等待着。。

没想到最后夺得头彩的是DA····

无法下载啊》

是不是真的？有人试了没？

有没有2000V3的小白鼠去试试发个测试报告回来

3000的在等等吧~

上面写的很清楚了~it does works with TA-088v3

没想到。。。。。。。。。。。

有V3的成功了么？

大概情况就是这样了，我要去上课了

期待呀！！！

等待...................

啊啊啊 ·什么时候到3K啊······